NOTE: The DC Cord is shipped with a 3 amp fuse already installed. The 3 amp fuse is for use with Solo®, Solo Plus, SoloLX, Solo Plus LX, REMstar® LX, REMstar Plus LX, Aria® LX, Virtuoso® LX, REMstar Plus, REMstar Pro,REMstar Auto, REMstar Nova, Somnia or Phönix Systems.
If you are using the DC Cord with a SleepEasy,REMstar, Aria, Virtuoso, Harmony® S/T, Duet LX, BiPAP® Pro or SynchronyTM System, you must change the fuse. Unscrew and remove the DC Cord’s cap. Remove the 3 amp fuse and install the 7 amp fuse if you are using a Synchrony System or a 5 amp fuse if it is one of the other types of units. Replace the cap.
The Respironics DC Cord can be used to operate Respironics’ CPAP Systems where AC is not available. It plugs into a standard cigarette lighter socket found in automotive vehicles.
WARNING: This cord will allow all of the Respironics CPAP Systems to function throughout their entire pressure ranges except for the REMstar® Choice Systems. This DC power cord can only be used with the REMstar Choice Systems for pressures of 11 cm H2O or lower.